2009 VAZ 2104 دليل ملاءمة العجلات تعرَّف على العجلات والإطارات المناسبة للسيارة VAZ 2104 للعام 2009
VAZ 2104 2104x [1984 .. 2012]
2009 VAZ 2104 2104x [1984 .. 2012] - التعديلات
VAZ 2104 2104x [1984 .. 2012] 1.6i
- الجيل: 2104x [1984 .. 2012] [EUDM]
- الإنتاج: [2000 .. 2012]
القدرة: 72 hp | 54 kW | 73 PS
- المحرك: 1.6L, , بنزين
|مم||مم بوصات||كلغ رطل||بار رطل لكل بوصة مربعة|
|OE 175/70R13 82S||5Jx13 ET29||27 - 31||105 4.13||18.8 41.5||
|175/70R13 82T||5.5Jx13 ET29||112 4.41||18.8 41.5||
|175/65R14 82T||5.5Jx14 ET29||112 4.41||18.7 41.3||
|185/55R15 82H||6Jx15 ET25||114 4.49||18.6 41.0||
The size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
Backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm) UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
Torque settings for wheel bolts or wheel nuts
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.