2014 Ferrari 458 Speciale دليل ملاءمة العجلات تعرَّف على العجلات والإطارات المناسبة للسيارة Ferrari 458 Speciale للعام 2014
Ferrari 458 Speciale 2013 .. 2016
الجيل
Coupe
2014 Ferrari 458 Speciale 2013 .. 2016 - التعديلات
بنزين:
4.5 V8 597hpFerrari 458 Speciale 2013 .. 2016 4.5
597 hp- الجيل: 2013 .. 2016
- الإنتاج: [2013 .. 2016]
-
مناطق المبيعات: USDM, CDM, MXNDM, LADM, EUDM, RUS, JDM, CHDM, SKDM, SAM, MEDM, NADM, SADM, AUDM
-
القدرة: 597 hp | 445 kW | 605 PS
- المحرك: 4.5L, , بنزين
-
الثقب المركزي / تجويف الصرة:
-
نمط المسامير (قطر دائرة المسامير): ( )
-
أدوات ربط العجلات: Lug bolts
-
مقاس اللولبة:
-
عزم ربط العجلات:غير معروف
| الإطارات | الجنوط | نطاق الإزاحة مم | التباعد الخلفي مم بوصات | وزن الإطارات كلغ رطل |
بار رطل لكل بوصة مربعة
|
||
|---|---|---|---|---|---|---|---|
OE
245/35ZR20
91Y
305/30ZR20 103Y 
|
9Jx20 ET46
11Jx20 ET58 |
44 - 48 56 - 60 |
173 210 6.81 8.27 |
24.0 28.7 53.0 63.2 |
2.1 2.0 30 29 |
الأصلية
|
|
|
235/35ZR20
92W
285/35ZR20 104W
|
9Jx20 ET46
11Jx20 ET58 |
173 210 6.81 8.27 |
22.7 29.0 50.0 63.9 |
2.1 2.0 30 29 |
|
The size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
Backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm) UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
Torque settings for wheel bolts or wheel nuts
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.