تنسيق البحث عن طراز السيارة أو مقاس الإطار أو الجنوط اختر علامة تبويب أدناه للحصول على بيانات الملاءمة لسيارتك أو للعثور على سيارات مطابقة لمعاييرك.

تحديد النوع والسنة والطراز للعثور على العجلات المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
±
±

2021 Volvo XC40 دليل ملاءمة العجلات تعرَّف على العجلات والإطارات المناسبة للسيارة Volvo XC40 للعام 2021

Volvo
تحديث الصفحة: فبراير 18, 2021, 1:27 م
مسرد الإطارات
يمكنك رؤية شروط الإطارات في هذه الصفحة

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm) UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch

UNF - Unified National Fine Thread

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

Torque settings for wheel bolts or wheel nuts

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.