2018 UAZ Profi دليل ملاءمة العجلات تعرَّف على العجلات والإطارات المناسبة للسيارة UAZ Profi للعام 2018
2018 UAZ Profi 236x [2017 .. 2023] - التعديلات
بنزين:
2.7i I4 148hpPetrol-LPG:
2.7i I4 141hpUAZ Profi 236x [2017 .. 2023] 2.7i
141 hp- الجيل: 236x [2017 .. 2023] [EUDM]
- الإنتاج: [2017 .. 2021]
-
مناطق المبيعات: RUS
-
القدرة: 141 hp | 105.2 kW | 143 PS
- المحرك: 2.7L, , Petrol-LPG
- مستويات القطع: Standart, Comfort
-
الثقب المركزي / تجويف الصرة:
-
نمط المسامير (قطر دائرة المسامير): ( )
-
أدوات ربط العجلات: Lug nuts
-
مقاس اللولبة:
-
عزم ربط العجلات:غير معروف
| الإطارات | الجنوط | نطاق الإزاحة مم | التباعد الخلفي مم بوصات | وزن الإطارات كلغ رطل |
بار رطل لكل بوصة مربعة
|
||
|---|---|---|---|---|---|---|---|
| OE LT225/75R16 117N | 6.5Jx16 ET40 | 38 - 42 | 135 5.31 | 31.9 70.3 |
2.2 4.3 32 62 |
الأصلية
|
|
| LT235/70R16 117N | 6.5Jx16 ET40 | 38 - 42 | 135 5.31 | 31.8 70.1 |
2.2 4.3 32 62 |
|
|
| LT245/70R16 117N | 6.5Jx16 ET40 | 38 - 42 | 135 5.31 | 34.0 75.1 |
2.2 4.3 32 62 |
|
|
| 245/70R16 121S | 7Jx16 ET35 | 33 - 37 | 137 5.39 | 34.0 75.1 |
2.2 3.0 32 44 |
|
UAZ Profi 236x [2017 .. 2023] 2.7i
148 hp- الجيل: 236x [2017 .. 2023] [EUDM]
- الإنتاج: [2017 .. 2021]
-
مناطق المبيعات: RUS
-
القدرة: 148 hp | 110 kW | 150 PS
- المحرك: 2.7L, , بنزين
- مستويات القطع: Standart, Ccomfort
-
الثقب المركزي / تجويف الصرة:
-
نمط المسامير (قطر دائرة المسامير): ( )
-
أدوات ربط العجلات: Lug nuts
-
مقاس اللولبة:
-
عزم ربط العجلات:غير معروف
| الإطارات | الجنوط | نطاق الإزاحة مم | التباعد الخلفي مم بوصات | وزن الإطارات كلغ رطل |
بار رطل لكل بوصة مربعة
|
||
|---|---|---|---|---|---|---|---|
| OE LT225/75R16 117N | 6.5Jx16 ET40 | 38 - 42 | 135 5.31 | 31.9 70.3 |
2.2 4.3 32 62 |
الأصلية
|
|
| LT235/70R16 117N | 6.5Jx16 ET40 | 38 - 42 | 135 5.31 | 31.8 70.1 |
2.2 4.3 32 62 |
|
|
| LT245/70R16 117N | 6.5Jx16 ET40 | 38 - 42 | 135 5.31 | 34.0 75.1 |
2.2 4.3 32 62 |
|
|
| 245/70R16 121S | 7Jx16 ET35 | 33 - 37 | 137 5.39 | 34.0 75.1 |
2.2 3.0 32 44 |
|
The size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
Backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm) UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
Torque settings for wheel bolts or wheel nuts
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.