تنسيق البحث عن طراز السيارة أو مقاس الإطار أو الجنوط اختر علامة تبويب أدناه للحصول على بيانات الملاءمة لسيارتك أو للعثور على سيارات مطابقة لمعاييرك.

تحديد النوع والسنة والطراز للعثور على العجلات المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
±
±

2009 Toyota Hiace دليل ملاءمة العجلات تعرَّف على العجلات والإطارات المناسبة للسيارة Toyota Hiace للعام 2009

Toyota
2009 هو عام انتقالي بين الجيل القديم للسيارة Toyota Hiace والجيل الجديد. يُرجى تحديد جيل السيارة الذي تحتاجه وتحديد المنطقة لإزالة الخطأ عند عرض المعلومات.
الجيل

Toyota Hiace XH10 Facelift [2006 .. 2012]

تحديد منطقة البيع لتضييق نطاق البحث:

عرض معلومات ملاءمة عجلات Toyota Hiace للأعوام الأخرى للطراز:
2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989
تحديث الصفحة: 20/01/2023 12:37
مسرد الإطارات
يمكنك رؤية شروط الإطارات في هذه الصفحة

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

Ply rating denotes tire strength and load capacity, based on its layer count.
Load Range
Ply
Rating
Max. Load Pressure

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.

Load Index represents the maximum load a tire can carry, while Speed Rating indicates the maximum safe speed.
Load Index
Speed Rating
Capacity
Max Speed