تنسيق البحث عن طراز السيارة أو مقاس الإطار أو الجنوط اختر علامة تبويب أدناه للحصول على بيانات الملاءمة لسيارتك أو للعثور على سيارات مطابقة لمعاييرك.

تحديد النوع والسنة والطراز للعثور على العجلات المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
±
±

2020 Brilliance V3 دليل ملاءمة العجلات تعرَّف على العجلات والإطارات المناسبة للسيارة Brilliance V3 للعام 2020

Brilliance
يُرجى تحديد تعديلات السيارة Brilliance V3 للعام 2020 أدناه والتحقُّق من الجداول للحصول على مقاس العجلة، ومقاس الإطار، وقطر دائرة المسامير، وإزاحة الجنوط وغيرها من معلمات ملاءمة العجلات. يتم تصنيف جميع تعديلات السيارة إلى مجموعات حسب الجيل. إذا لزم الأمر، يمكنك تصفيتها حسب منطقة توزيع المبيعات.
التنقل في الصفحة حسب جيل السيارة:

Brilliance V3 Facelift [2017 .. 2020]

الجيل
التصفية حسب المنطقة:
الصين CHDM
أمريكا الوسطى والجنوبية LADM
جنوب شرق آسيا SAM

2020 Brilliance V3 Facelift [2017 .. 2020] - التعديلات

Brilliance V3 Facelift [2017 .. 2020] 1.5i

110 hp
LADM CHDM
  • الجيل: Facelift [2017 .. 2020]
  • الإنتاج: [2017 .. 2020]
  • مناطق المبيعات: أمريكا الوسطى والجنوبية, الصين, جنوب شرق آسيا
  • القدرة: 110 hp | 82 kW | 111 PS
  • المحرك: 1.5 L, , بنزين
  • الثقب المركزي / تجويف الصرة:
  • نمط المسامير (قطر دائرة المسامير):
    غير معروف
  • أدوات ربط العجلات: مسامير العجلات
  • مقاس اللولبة:
  • عزم ربط العجلات:
    غير معروف
الإطارات   الجنوط   نطاق الإزاحة مم التباعد الخلفي مم بوصات وزن الإطارات كلغ رطل ضغط الإطارات (أمامي/خلفي) بار رطل لكل بوصة مربعة
OE 215/60R17 7Jx17 ET38 36 - 40 140 5.51 11.8 26.1
215/55R18 7Jx18 ET38 140 5.51 11.6 25.6

Brilliance V3 Facelift [2017 .. 2020] 1.6i

117 hp
CHDM
  • الجيل: Facelift [2017 .. 2020]
  • الإنتاج: [2019 .. 2020]
  • مناطق المبيعات: الصين
  • القدرة: 117 hp | 87 kW | 118 PS
  • المحرك: 1.6 L, , بنزين
  • الثقب المركزي / تجويف الصرة:
  • نمط المسامير (قطر دائرة المسامير):
    غير معروف
  • أدوات ربط العجلات: مسامير العجلات
  • مقاس اللولبة:
  • عزم ربط العجلات:
    غير معروف
الإطارات   الجنوط   نطاق الإزاحة مم التباعد الخلفي مم بوصات وزن الإطارات كلغ رطل ضغط الإطارات (أمامي/خلفي) بار رطل لكل بوصة مربعة
OE 36 - 40 140 5.51 11.8 26.1
140 5.51 11.6 25.6

Brilliance V3 2015 .. 2020

الجيل
التصفية حسب المنطقة:
روسيا RUS

2020 Brilliance V3 2015 .. 2020 - التعديلات

بنزين:
1.5i I4 106hp

Brilliance V3 2015 .. 2020 1.5i

106 hp
RUS
  • الجيل: 2015 .. 2020
  • الإنتاج: [2019 .. 2020]
  • مناطق المبيعات: روسيا
  • القدرة: 106 hp | 79 kW | 107 PS
  • المحرك: 1.5 L, , بنزين
  • مستويات القطع: Comfort, Deluxe
  • الثقب المركزي / تجويف الصرة:
  • نمط المسامير (قطر دائرة المسامير): ()
  • أدوات ربط العجلات: مسامير العجلات
  • مقاس اللولبة:
  • عزم ربط العجلات:
    غير معروف
الإطارات   الجنوط   نطاق الإزاحة مم التباعد الخلفي مم بوصات وزن الإطارات كلغ رطل ضغط الإطارات (أمامي/خلفي) بار رطل لكل بوصة مربعة
OE 215/60R17 7Jx17 ET38 36 - 40 140 5.51 11.8 26.1
215/55R18 7Jx18 ET38 140 5.51 11.6 25.6

عرض معلومات ملاءمة عجلات Brilliance V3 للأعوام الأخرى للطراز:
2020 2019 2018 2017 2016 2015
تحديث الصفحة: فبراير 18, 2021, 1:27 م
مسرد الإطارات
يمكنك رؤية شروط الإطارات في هذه الصفحة

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.