تنسيق البحث عن طراز السيارة أو مقاس الإطار أو الجنوط اختر علامة تبويب أدناه للحصول على بيانات الملاءمة لسيارتك أو للعثور على سيارات مطابقة لمعاييرك.

تحديد النوع والسنة والطراز للعثور على العجلات المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
±
±

2003 Bentley Azure دليل ملاءمة العجلات تعرَّف على العجلات والإطارات المناسبة للسيارة Bentley Azure للعام 2003

Bentley
يُرجى تحديد تعديلات السيارة Bentley Azure للعام 2003 أدناه والتحقُّق من الجداول للحصول على مقاس العجلة، ومقاس الإطار، وقطر دائرة المسامير، وإزاحة الجنوط وغيرها من معلمات ملاءمة العجلات. إذا لزم الأمر، يمكنك تصفيتها حسب منطقة توزيع المبيعات.

Bentley Azure I [1995 .. 2005]

الجيل
التصفية حسب المنطقة:
كندا CDM
أوروبا EUDM
الولايات المتحدة الأمريكية USDM

2003 Bentley Azure I [1995 .. 2005] - التعديلات

بنزين:
6.75T V8 402hp

Bentley Azure I [1995 .. 2005] 6.75T

402 hp
USDM CDM
  • الجيل: I [1995 .. 2005]
  • الإنتاج: [1996 .. 2005]
  • مناطق المبيعات: الولايات المتحدة الأمريكية, كندا, أوروبا
  • القدرة: 402 hp | 300 kW | 408 PS
  • المحرك: 6.8 L, , بنزين
  • الثقب المركزي / تجويف الصرة:
  • نمط المسامير (قطر دائرة المسامير):
  • أدوات ربط العجلات: مسامير العجلات
  • مقاس اللولبة:
  • عزم ربط العجلات:
    غير معروف
الإطارات   الجنوط   نطاق الإزاحة مم التباعد الخلفي مم بوصات وزن الإطارات كلغ رطل ضغط الإطارات (أمامي/خلفي) بار رطل لكل بوصة مربعة
OE 255/50R18 8Jx18 ET55 53 - 57 169 6.65 13.6 30.0

عرض معلومات ملاءمة عجلات Bentley Azure للأعوام الأخرى للطراز:
2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996
تحديث الصفحة: نوفمبر 14, 2022, 3:27 م
مسرد الإطارات
يمكنك رؤية شروط الإطارات في هذه الصفحة

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.