تنسيق البحث عن طراز السيارة أو مقاس الإطار أو الجنوط اختر علامة تبويب أدناه للحصول على بيانات الملاءمة لسيارتك أو للعثور على سيارات مطابقة لمعاييرك.

تحديد النوع والسنة والطراز للعثور على العجلات المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
تحديد قيم الحقول أدناه للعثور على السيارة المطابقة:
±
±

2001 Audi TT دليل ملاءمة العجلات تعرَّف على العجلات والإطارات المناسبة للسيارة Audi TT للعام 2001

Audi
يُرجى تحديد تعديلات السيارة Audi TT للعام 2001 أدناه والتحقُّق من الجداول للحصول على مقاس العجلة، ومقاس الإطار، وقطر دائرة المسامير، وإزاحة الجنوط وغيرها من معلمات ملاءمة العجلات. إذا لزم الأمر، يمكنك تصفيتها حسب منطقة توزيع المبيعات.

Audi TT 8N [1998 .. 2006]

الجيل
التصفية حسب المنطقة:
كندا CDM
أوروبا EUDM
الشرق الأوسط MEDM
المكسيك MXNDM
روسيا RUS
الولايات المتحدة الأمريكية USDM

2001 Audi TT 8N [1998 .. 2006] - التعديلات

Audi TT 8N [1998 .. 2006] 1.8T

222 hp
USDM CDM
  • الجيل: 8N [1998 .. 2006] [EUDM]
  • الإنتاج: [1998 .. 2006]
  • مناطق المبيعات: الولايات المتحدة الأمريكية, كندا, المكسيك, أوروبا, روسيا, الشرق الأوسط
  • القدرة: 222 hp | 165.5 kW | 225 PS
  • المحرك: 1.8 L, , بنزين
  • الثقب المركزي / تجويف الصرة:
  • نمط المسامير (قطر دائرة المسامير):
  • أدوات ربط العجلات: مسامير العجلات
  • مقاس اللولبة:
  • عزم ربط العجلات:
الإطارات   الجنوط   نطاق الإزاحة مم التباعد الخلفي مم بوصات وزن الإطارات كلغ رطل ضغط الإطارات (أمامي/خلفي) بار رطل لكل بوصة مربعة
OE 205/55R16 89V 7Jx16 ET31 29 - 33 133 5.24 10.0 22.1 2.1 30
205/50R17 89V 7Jx17 ET31 133 5.24 9.8 21.5 2.2 32
205/45ZR18 88Z 7Jx18 ET31 133 5.24 9.3 20.4 2.4 35

Audi TT 8N [1998 .. 2006] 1.8T

178 hp
USDM CDM
  • الجيل: 8N [1998 .. 2006] [EUDM]
  • الإنتاج: [1998 .. 2006]
  • مناطق المبيعات: الولايات المتحدة الأمريكية, كندا, المكسيك, أوروبا, روسيا, الشرق الأوسط
  • القدرة: 178 hp | 132.5 kW | 180 PS
  • المحرك: 1.8 L, , بنزين
  • الثقب المركزي / تجويف الصرة:
  • نمط المسامير (قطر دائرة المسامير):
  • أدوات ربط العجلات: مسامير العجلات
  • مقاس اللولبة:
  • عزم ربط العجلات:
الإطارات   الجنوط   نطاق الإزاحة مم التباعد الخلفي مم بوصات وزن الإطارات كلغ رطل ضغط الإطارات (أمامي/خلفي) بار رطل لكل بوصة مربعة
OE 205/55R16 89V 7Jx16 ET31 29 - 33 133 5.24 10.0 22.1 2.1 30
205/50R17 89V 7Jx17 ET31 133 5.24 9.8 21.5 2.2 32
205/45ZR18 88Z 7Jx18 ET31 133 5.24 9.3 20.4 2.4 35

Audi TT 8N [1998 .. 2006] 1.8T sport

237 hp
EUDM
  • الجيل: 8N [1998 .. 2006] [EUDM]
  • الإنتاج: [1998 .. 2006]
  • مناطق المبيعات: أوروبا
  • القدرة: 237 hp | 176.5 kW | 240 PS
  • المحرك: , بنزين
  • الثقب المركزي / تجويف الصرة:
  • نمط المسامير (قطر دائرة المسامير):
  • أدوات ربط العجلات: مسامير العجلات
  • مقاس اللولبة:
  • عزم ربط العجلات:
الإطارات   الجنوط   نطاق الإزاحة مم التباعد الخلفي مم بوصات وزن الإطارات كلغ رطل ضغط الإطارات (أمامي/خلفي) بار رطل لكل بوصة مربعة
OE 89V 30 - 34 140 5.51 10.6 23.3 2.2 32
88Z 140 5.51 10.1 22.2 2.4 35
88Z 147 5.79 10.3 22.7 2.4 35

عرض معلومات ملاءمة عجلات Audi TT للأعوام الأخرى للطراز:
2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998
تحديث الصفحة: يناير 28, 2023, 6:14 ص
مسرد الإطارات
يمكنك رؤية شروط الإطارات في هذه الصفحة

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.